Product code: ACU04FCL000Z00 | Product description: ACUS 1.2 13W 60° 4000K 700mA  | Technical decription: Inground luminaire, drive-over, suitable for outdoor environments (IP66/IP67), with operating temperature range: -20°C / +50°C. To reduce weight and ensure corrosion resistance, the body is made of aluminum and the round frame of steel. The light source is LED C.O.B powered by constant current, max 700mA, for maximum power of 13W. The high luminous flux makes it ideal for marking pedestrian and driveway paths or illuminating facades and architectural details thanks to the optics with TIR lens. The LED source is recessed for greater visual comfort. Color rendering index CRI > 90. Acus is equipped with IdroSkudŽ system to protect electronic components from voltage spikes, polarity reversal and water infiltration. There are optionals for anti-glare (honeycomb and louvre) and installation accessories (drive-over outercase). The product must be combined with a power supply to ensure its operation. The power supply must be ordered separately. The amount of luminaires that can be connected to a single power supply varies depending on the type of installation. It is up to the installer to verify the possible voltage drop by evaluating the distance between the product and the power supply. | Source type: COB LED | CCT: 4000K | CRI: > 90 | MacAdam (SDCM): 3 | Source lumen output (lm): 1592 | Luminaire lumen output (lm): 1098 | Light emission: Wide | Beam angle: 60° | Photobiological risk: RG0 | ULR: 1 | BUG Rating: B0 U4 G0 | CIE Flux Code: 0 0 0 0 100 | LED lifetime: L80 B10 50.000h | Efficiency class: This product contains a light source of energy efficiency class (EU2019/2015): F | Diameter (mm): 140 | Height (mm): 62 | Weight (g): 1230 | IP Rating: IP66 / IP67 | IK rating: IK10 | Shape: Round | Finishing colour: Steel | Frame material: Shot peened stainless steel 316L | Body material: Anodized aluminum anticorodal 6082 | External screws material: Stainless steel 316L (A4) | Diffuser material: Extraclear tempered glass | Diffuser thickness (mm): 12 | Class ISO 9223: CX | Optic type: Technopolymer TIR lens  | Optical optional: None | Maximal working temperature: +50° C | Minimal working temperature: -20° C | Installation type: With outer-case | Maximal static load (kN): 20 | Walk-over: Yes | Driver-over: Yes | Maximal surface temperature: +60° C | Areas EN 60598-2-13: A1 / A2 / A3 / A4 | Nominal power (W): 13 | Input power type: Costant current - 700mA | Ballast: Remote | Insulation class: III | Dimmable: Yes | Connector type: M12 - 5 poles IP67 | Power cable length: Not pre-wired | Electrical connection: Series connection | IdroskudŽ protection: Yes | Inverse polarity protection: Yes | Voltage spikes protection: Yes |