Product code: CEA04FCS105H00 | Product description: OCEANO 3.0 3W AL-TP 10° 4000K 24V HC 5M | Technical decription: Inground luminaire, walk-over, suitable for outdoor environments (IP66/IP68), with operating temperature range: -20°C / +50°C. To provide maximum versatility of application, the body can be made of aluminum or steel; the frame is made of a special technopolymer that is extremely resistant to corrosion and imitates the appearance of wood. The light source consists of a single 3W power Led chip powered at 24V constant voltage with integrated driver. The luminous flux makes it ideal for tracing pedestrian paths or achieving a starry ceiling effect, thanks to the different emission angles. The source is set back for greater visual comfort. Color rendering index CRI > 90. Oceano is equipped with IdroSkudŽ system to protect electronic components from voltage spikes, polarity reversal and water infiltration. There are optionals for anti-glare (honeycomb) and installation accessories (draining and waterproof outercase and spring for ceiling attachment). The product must be combined with a power supply to ensure its operation. The power supply must be ordered separately. The amount of luminaires that can be connected to a single power supply varies depending on the type of installation. It is up to the installer to verify the possible voltage drop by evaluating the distance between the product and the power supply. | Source type: single chip power LED | CCT: 4000K | CRI: > 90 | MacAdam (SDCM): 2 | Source lumen output (lm): 236 | Luminaire lumen output (lm): 151 | Light emission: Narrow | Beam angle: 10° | Photobiological risk: RG0 | ULR: 1 | BUG Rating: B0 U3 G0 | CIE Flux Code: 0 0 0 0 100 | LED lifetime: L80 B10 50.000h | Efficiency class: This product contains a light source of energy efficiency class (EU2019/2015): G | Diameter (mm): 60 | Height (mm): 93 | Weight (g): 327 | IP Rating: IP66 / IP68 10m | IK rating: IK10 | Shape: Round | Finishing colour: Wood effect | Frame material: Technopolymer | Body material: Anodized aluminum anticorodal 6082 | External screws material: Stainless steel 316L (A4) | Diffuser material: Extraclear tempered glass | Diffuser thickness (mm): 8 | Class ISO 9223: CX | Optic type: Technopolymer TIR lens  | Optical optional: Honeycomb | Maximal working temperature: +50° C | Minimal working temperature: -20° C | Installation type: With outer-case | Maximal static load (kN): 5 | Walk-over: Yes | Driver-over: No | Maximal surface temperature: +50° C | Areas EN 60598-2-13: A1 / A2 | Nominal power (W): 3 | Input power type: Costant voltage - 24V | Ballast: Remote | Insulation class: III | Dimmable: Yes | Power cable type: H05RN-F 2x0,75 mm˛ | Power cable length: 5 m | Electrical connection: Parallel connection | IdroskudŽ protection: Yes | Inverse polarity protection: Yes | Voltage spikes protection: Yes |