Product code: FLM05PCS0CTC00 | Product description: FLUMEN 3.1 14W CORTEN 5° RGBW PWM 1,5M | Technical decription: FLUMEN is a range of floodlights suitable for outdoor environments (IP66/IP67), with an operating temperature range of -20°C / +50°C. To reduce weight and ensure wear resistance, the body is made of solid aluminum. The aluminum body is protected by an epoxy polyester powder coating, which guarantees corrosion resistance equal to 1500 hours in salt spray. The light source consists of a single power LED chip, with versions from 2W up to 14W powered by 24V constant voltage. The RGBW versions have a multi-chip source. The high luminous flux makes it ideal for marking pedestrian paths or illuminating facades and architectural details thanks to the TIR lens optic. The LED source is recessed for greater visual comfort. FLUMEN are equipped with the IdroSkudŽ system, to protect the electronic components from voltage spikes, polarity reversal and water infiltration. Optional anti-glare options (honeycomb) and accessories for ground installation (spike) are available. The product must be paired with a power supply to ensure its operation. The power supply must be ordered separately. The number of fixtures that can be connected to a single power supply varies depending on the type of installation. It is the installer's responsibility to check for possible voltage drops by evaluating the distance between the product and the power supply. | Source type: LED multi-chip | CCT: RGBW (4000K) | CRI: > 80 | MacAdam (SDCM): 3 | Source lumen output (lm): 1142 | Luminaire lumen output (lm): 504 | Light emission: Narrow | Beam angle: 5° | Photobiological risk: RG0 | ULR: 0,00% | BUG Rating: B0 U0 G0 | CIE Flux Code: 95 98 99 100 100 | LED lifetime: L80 B10 50.000h | Efficiency class: This product contains a light source of energy efficiency class (EU2019/2015): G | Width (mm): 102 | Length (mm): 115 | Height (mm): 142 | Weight (kg): 1,76 | IP Rating: IP66 / IP67 | IK rating: IK10 | Type of finishing: Protective primer followed by epoxy and polyester paint | Finishing colour: Corten | Body material: Anodized aluminum anticorodal 6082 | External screws material: Stainless steel 316L (A4) | Diffuser material: Extraclear tempered glass | Diffuser thickness (mm): 10 | Class ISO 9223: C5 | Optic type: Technopolymer TIR Lens | Maximal working temperature: +50° C | Minimal working temperature: -20° C | Nominal power (W): 14 | Input power type: Costant voltage - 24V | Ballast: Remote | Insulation class: III | Dimmable: Yes (PWM) | Power cable type: FR5FOEM7-AD8 6x0,5 mm˛ | Power cable length: 0,4 m | Electrical connection: Parallel connection | IdroskudŽ protection: Yes | Inverse polarity protection: Yes | Voltage spikes protection: Yes |