Product code: FRM04CCZ0CTA00 | Product description: FORMA 2.0 10W CORTEN A25° 2700K 24V | Technical decription: Modular step-light wall mounting fixture, suitable for outdoor environments (IP66), with wide operating temperature range: -20°C / +50°C. The body is made of aluminum protected by polyester epoxy paint to ensure corrosion resistance of 1500 hours in salt spray test. The light source consists of SMD LED board of 10W powered at 24V. The cover and reflector are modular and removable from the LED engine, without removing it from the wall. This allows for easy maintenance, with only one component to be replaced, and at the same time great freedom of customisation. The three FORMA parts can also be ordered separately. The luminous flux and design make it ideal as a walkway marker light for footpaths or flights of stairs. Color rendering index CRI > 90. The FORMA is equipped with IdroSkudŽ system to protect electronic components from voltage spikes, polarity reversal and water infiltration. The product must be combined with a power supply to ensure its operation. The power supply must be ordered separately. The amount of luminaires that can be connected to a single power supply varies depending on the type of installation. It is up to the installer to verify the possible voltage drop by evaluating the distance between the product and the power supply. | Source type: SMD chip | CCT: 2700K | CRI: > 90 | MacAdam (SDCM): 3 | Source lumen output (lm): 1601 | Luminaire lumen output (lm): 720 | Light emission: Asymmetric | Beam angle: A25° | Photobiological risk: RG0 | ULR: 0,02 | BUG Rating: B0 U1 G1 | CIE Flux Code: 31 62 86 98 100 | LED lifetime: L80 B10 50.000h | Width (mm): 235 | Length (mm): 32 | Height (mm): 235 | Weight (g): 967 | IP Rating: IP66 | IK rating: IK08 | Shape: Round | Type of finishing: Protective primer followed by epoxy and polyester paint | Finishing colour: Corten | Body material: Die-cast aluminum EN AB46100 | External screws material: Stainless steel 316L (A4) | Diffuser material: Polycarbonate UV-stabilised | Diffuser thickness (mm): 2 | Class ISO 9223: C5 | Optical optional: None | Maximal working temperature: +50° C | Minimal working temperature: -20° C | Nominal power (W): 10 | Input power type: Costant voltage - 24V | Ballast: Remote | Insulation class: III | Dimmable: Yes | Power cable type: FR5FOEM7-AD8 2x0,5 mm˛ | Power cable length: 0,4 m | Electrical connection: Parallel connection | IdroskudŽ protection: Yes | Inverse polarity protection: Yes | Voltage spikes protection: Yes |