Product code: FRM06FCZ0W0A00 | Product description: FORMA 2.2 10W WH9003 A25° 4000K 24V DC | Technical decription: FORMA is a range of modular, wall-mounted step lights, suitable for outdoor environments (IP65), with a wide operating temperature range: -20°C / +50°C. The body is made of aluminum protected by an epoxy polyester coating that guarantees corrosion resistance equal to 1,500 hours in salt spray. The light source consists of a 5W or 10W SMD LED board, powered by 24V constant voltage. The cover and magnetic reflector are modular and can be removed from the LED engine without removing it from the wall. This allows for easy maintenance, with the possibility of replacing a single component and at the same time great freedom of customization. The three parts of FORMA can also be ordered separately. Its luminous flux and design make it ideal as a step light for pedestrian paths or stairways. Color Rendering Index CRI > 90. FORMA is equipped with the IdroSkudŽ system to protect electronic components from voltage spikes, polarity reversal, and water infiltration. The product must be paired with a power supply to ensure its operation. The power supply must be ordered separately. The number of fixtures that can be connected to a single power supply varies depending on the type of installation. It is the installer's responsibility to check for possible voltage drops by evaluating the distance between the product and the power supply. | Source type: chip SMD | CCT: 4000K | CRI: > 90 | MacAdam (SDCM): 2 | Source lumen output (lm): 1685 | Luminaire lumen output (lm): 758 | Light emission: Asymmetrical | Beam angle: A25° | Photobiological risk: RG0 | ULR: 0,0014 | BUG Rating: B0 U1 G1 | CIE Flux Code: 30 62 87 100 100 | LED lifetime: L80 B10 50.000h | Efficiency class: This product contains a light source of energy efficiency class (EU2019/2015): C | Width (mm): 245 | Length (mm): 34,7 | Height (mm): 150 | Weight (kg): 0,927 | IP Rating: IP65 | IK rating: IK08 | Type of finishing: Protective primer followed by epoxy and polyester paint | Body material: Die-cast aluminum EN AB46100 | External screws material: Stainless steel 316L (A4) | Diffuser material: Polycarbonate UV-stabilised | Diffuser thickness (mm): 2 | Class ISO 9223: C5 | Maximal working temperature: +50° C | Minimal working temperature: -20° C | Nominal power (W): 10 | Input power type: Costant voltage - 24V | Ballast: Remote | Insulation class: III | Dimmable: Yes (PWM) | Power cable type: FR5FOEM7 - AD8 2x0,5 mm˛ | Power cable length: 0,4 m | Electrical connection: Parallel connection | IdroskudŽ protection: Yes | Inverse polarity protection: Yes | Voltage spikes protection: Yes |